- Industry leading 3 YEAR WARRANTY
- Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
- CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity
- One Set of 4″ Tall Truck Adapters Included; 6’9″ Lift Height Maximum with Truck Adapters
- All Robot Welded Structure with Durable Powder Coated Finish
APlusLift HW-10KBP-A car lift (auto hoist) is one of the most affordable floor plate car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity.
We are proud to offer an industry leading 3 year warranty for all parts! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service!
Free shipping to lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require on-site forklift (no liftgate). We strongly recommend against renting a forklift; expense not reimbursed. See shipping policy below for limited access/remote/high-cost areas.
Specifications | |||||||||
Model | HW-10KBP-A (This Model) |
HW-10KOH-A for Comparison |
|||||||
Manual | HW-10KBP-A Manual | HW-10KOH-A Manual | |||||||
Style | Floor Plate | Overhead | |||||||
Lock Release | Double Point Release | Double Point Release | |||||||
Warranty | 3 Years (36 Months) | 3 Years (36 Months) | |||||||
Lifting Capacity | 10,000 LB | 10,000 LB | |||||||
Overall Height | 113 5/8″ | 143 3/16″ | |||||||
Overall Width | 134 5/16″ | 134 5/16″ | |||||||
Maximum Lift height with Truck Adapters | 81″ | 81″ | |||||||
Maximum Lift height without Truck Adapters | 75″ | 75″ | |||||||
Minimum Height of Adjustable Pads from Ground | 4″ | 4″ | |||||||
Drive Through Width (Carriage to Carriage) | 100″ | 100″ | |||||||
Column to Column Width | 109″ | 109″ | |||||||
Column Cross Section | 11″L x 7″W | 11″L x 7″W | |||||||
Floor Plate Cross Section | 10 5/8″W x 1 7/8″H | N/A | |||||||
Driving Mode | Dual hydraulic cylinders, chain drive | Dual hydraulic cylinders, chain drive | |||||||
Motor | 220V Single Phase 3HP 10A (recommend a 30A breaker) | 220V Single Phase 3HP 10A (recommend a 30A breaker) | |||||||
Time to full rise | 50 seconds | 50 seconds | |||||||
Hydraulic Oil | 3-5 gallons AW32/AW46 (Not Included) | 3-5 gallons AW32/AW46 (Not Included) | |||||||
Shipping Weight | 1370 LB | 1470 LB | |||||||
Shipping package size | 113″L x 22″W x 40″H | 113″L x 22″W x 40″H | |||||||
Concrete Requirement | 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below) | ||||||||
Parts Included |
|
||||||||
Optional Parts | 2 3/4″ and 6″ Tall Truck Adapters | ||||||||
Arm Assembly | Combo (Symmetrical and Asymmetrical) Arm Assembly | ||||||||
Front Arms | Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″ | ||||||||
Back Arms | Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″ | ||||||||
Column Steel Thickness | 13/64″ | ||||||||
Carriage Steel Thickness | 15/64″ | ||||||||
Carriage Yoke Thickness | 9/16″ | ||||||||
Arm Steel Thickness | 15/64″ | ||||||||
Base Plate Steel Thickness | 5/8″ |
Features
- CE Certified Lift Structure and Hydraulic System
- Third party tested with a dynamic load capacity of 115%
- Third party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Double point safety lock release
- Double Seal Rings Protecting PU Material
- Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32″ with Supporting Bracket.
- Ultra high molecular self lubricating nyl
I have had 2500 HD on it with no issues. I wouldn't go any higher then that def stay around 8k or less to be safe it's still a Chinese lift lol
It doesn't come with hydraulic fluid, so plan ahead.
It up at the warehouse-
Shipping company messed up some paint but that’s it.
Very pleased thus far.
I've included some pics of the footers I poured.
The shipping was really fast.
A nice looking unit.
Easy to install. I had at least 6" of concrete floor to mount it in. The anchors grabbed well. I had to re-tighten a couple after the first lift.
Very nice power unit.
I like the safety release mechanism unlike the other lifts I have where I have to hold the latch release the entire time of lowering the vehicle.
The bad
It claims to be able to do 10,000 lbs, I would not try to lift anything beyond 7,000 lbs. I have a Titan lift that is rated for 9,000 lbs. If this one can 10,000 then my Titan lift can do 20,000.
The ugly
I saw some reviews that said they were concerned when they saw the lift arms flex. I put a 6,500 lb vehicle on it and well yes the arms were flexing. When I had it to it's upmost position I shook the vehicle and it moved way too much in my opinion. I will end up doing the same thing as a couple of others and use jack stands when doing heavy duty work.
In a nutshell the price is good but the weight lift rating is too high in my opinion.